Commercial Reach-In Refrigerator Buying Guide: Size, Capacity & Kitchen Fit
The right commercial reach-in refrigerator fits your food, your kitchen, and the way your team works.
Start with the inventory you need to hold between deliveries. Turn that inventory into a container and shelf layout, then measure the installation space and delivery route. Door configuration, compressor location, electrical requirements, and operating costs help narrow the remaining options.
This guide covers upright refrigerators for kitchen ingredient storage, also called reach-in coolers. Freezers, beverage display refrigerators, and refrigerated prep tables serve different needs.
Is a Reach-In Refrigerator Right for Your Kitchen?
A reach-in can provide the main refrigerated storage for a smaller operation or keep working ingredients close to the line in a kitchen with a walk-in cooler.
Choose the equipment around how food moves through your operation.
| Your main need | What to evaluate |
|---|---|
| Frequent access to ingredients during service | A reach-in near the relevant workstations |
| Bulk deliveries stored in cases or on rolling racks | Walk-in storage, potentially supported by reach-ins |
| Ingredients stored directly beneath a preparation surface | A refrigerated prep table or undercounter refrigerator |
| Customer-facing packaged-food or beverage display | A merchandiser suitable for those products |
These options can work together. A kitchen may keep reserve stock in a walk-in and a smaller working supply near the cooks who use it.
Choose a reach-in when accessible cabinet storage solves your daily needs. Evaluate a walk-in when bulk inventory and rack access are the larger challenge. There is no universal restaurant size or seat count at which every operation needs to switch.
If your main need is refrigerated storage beneath a preparation surface, see our Sandwich Prep Table Buying Guide. For a beverage-focused bar station, see our Back Bar Refrigerator Buying Guide.
Plan Capacity Around Containers and Deliveries
Count your highest inventory level
Cubic feet help compare nominal cabinet capacity. They do not show whether your widest tray will pass through a door or how many ingredient bins will fit on a shelf.
Start with the point when refrigerated inventory is highest, often immediately after a delivery. List each product, its package dimensions, and the maximum quantity held.
Include prepared food stored overnight and any reserve stock. Count each item once, and allow for specific growth you expect rather than adding capacity without a plan.
For example, suppose an operation uses eight identical ingredient containers per busy day, receives deliveries every three days, and holds four additional containers as reserve:
8 containers × 3 days + 4 reserve containers = 28 containers
Six separate containers of prepared food bring the planning total to 34 containers.
This is an inventory-planning example, not a recommended storage period. Apply the appropriate storage limits to each food.
Convert that inventory into a shelf layout
Measure containers with lids and handles attached. Then compare:
- Usable shelf width and depth.
- Height between shelves.
- Clear door-opening dimensions.
- Shelf load limits.
- Space occupied by supports, internal components, and required air passages.
Consider this simplified example:
| Assumed measurement | Example |
|---|---|
| Container footprint | 12 × 10 in / approximately 305 × 254 mm |
| Usable shelf area | 26 × 22 in / approximately 660 × 559 mm |
| Initial arrangement | Two containers across and two deep |
| Containers per shelf level | 4 |
| Shelf levels needed for 34 containers | At least 9 |
Four containers occupy a basic rectangle of 24 × 20 inches. That leaves only 2 inches in each overall direction within the assumed shelf area. Whether that remaining space is sufficient depends on the actual equipment, container placement, and airflow requirements.
The arrangement also needs enough vertical space for the containers and their removal. A plan that works from above may fail once container height, shelf supports, weight, and access are considered.
This example is a geometry exercise, not a Magicool loading test or a claim that either model below holds 34 containers.
Choose a cabinet after the layout works. If it depends on blocking vents, exceeding shelf loads, or moving several containers to retrieve one ingredient, revise the storage arrangement.
Choose the Right Number of Sections and Doors
Compare storage sections before counting doors
A section is a cabinet bay. A door is an access panel.
A two-section refrigerator may have two full-height doors or four half doors. Four doors do not automatically mean four storage sections, more capacity, or independently controlled temperature zones.
Use section count as an initial filter:
| Configuration | Worth considering when |
|---|---|
| One section | One workstation needs a limited working supply |
| Two sections | A broader inventory needs storage in one location |
| Three sections | The inventory requires more centralized storage and a wider cabinet fits |
These are planning starting points. Usable storage depends on the specific cabinet.
Full-height or half-height doors?
Full-height doors can suit tall containers and flexible shelf arrangements. Half doors can suit inventory organized into upper and lower access areas.
Choose around what passes through the opening and how staff retrieve it. If large trays are central to your operation, opening dimensions and support compatibility matter more than door count.
Solid or glass doors?
Solid doors suit ingredient storage where display visibility is unnecessary. Glass doors let staff see contents before opening the cabinet. DOE purchasing guidance identifies insulation advantages for solid doors and visibility advantages for glass doors.
For back-of-house storage, prioritize container access, cleaning, and the storage layout. For customer-facing display, evaluate equipment designed for that use.
One Large Refrigerator or Multiple Smaller Units?
More capacity in one location does not always improve the kitchen’s workflow.
| Decision factor | One larger cabinet | Multiple smaller cabinets |
|---|---|---|
| Inventory organization | Keeps stock together | Divides stock by station or team |
| Staff access | Creates a shared retrieval point | Can place ingredients near separate workstations |
| Installation | Requires one suitable continuous position | Requires several suitable positions and power connections |
| Failure planning | One failure affects the cabinet’s stored stock | A failure can be isolated to one unit |
| Cost comparison | Evaluate one cabinet’s total cost | Add costs across all units |
Choose a larger cabinet when receiving, stocking, and retrieval work well from one location. Consider separate cabinets when different teams repeatedly cross the kitchen for ingredients.
Before buying multiple units, assign the inventory to each. Combined capacity can look sufficient while one refrigerator remains crowded and another is underused.
Separate equipment can limit the stock directly affected by one failure, but it does not guarantee backup capacity. Plan where food could actually be moved.
Compare the complete arrangement, including installed space, energy consumption, cleaning access, and maintenance. Two smaller units are not automatically cheaper to operate.
Measure Four Different Types of Space
A refrigerator fitting against a wall is only the first check.
| Measurement | What to record |
|---|---|
| Cabinet size | Overall width, depth, handles, and installed height with the specified legs or casters |
| Installation space | Required ventilation clearances and access for cleaning or service |
| Door-opening space | Door swing, usable aisle space, and room to remove containers |
| Delivery route | Packaged dimensions, unloading point, doorways, turns, thresholds, stairs, and elevators |
Check the complete delivery route
Measure the narrowest clear opening, including restrictions caused by door hardware and overhead obstructions.
Check turns as well as straight passages. A cabinet that passes through the entrance may still be unable to turn into the kitchen.
If delivery depends on removing packaging or equipment components, agree on that handling plan before ordering. Do not assume parts can be removed safely.
Test the working footprint
Mark the proposed cabinet position and door swing on the floor. Walk the route staff will use while carrying containers.
Can someone retrieve food while another person passes? Can a large bin be removed without hitting nearby equipment? Is there access for cleaning and service?
Use the exact model’s ventilation requirements to complete the footprint. There is no universal clearance suitable for every reach-in.
Eliminate a model if it cannot reach the installation position or operate with the required space. Extra capacity does not compensate for an unsuitable location.
Top-Mounted vs. Bottom-Mounted Compressors
For commercial reach-ins, these terms describe the refrigeration machinery. They do not refer to the freezer-compartment position in a household refrigerator.
DOE guidance notes that bottom-mounted systems can benefit from cooler air near the floor and place food storage at a more accessible height. It recommends considering top-mounted equipment where settling flour dust could enter a low-mounted system.
| Kitchen condition | How to approach the choice |
|---|---|
| Frequent flour handling | Evaluate exposure of low-mounted machinery to settling dust |
| Frequent ingredient retrieval | Compare the height of the shelves staff will use most |
| Nearby cooking equipment | Assess heat exposure and the model’s permitted operating conditions |
| Restricted cleaning access | Examine how the condenser and service components are reached |
Choose around the actual installation environment. Compressor position alone does not establish cooling performance, energy consumption, or suitability beside hot equipment.
If both arrangements are suitable for the site, compare access for daily use and routine maintenance before deciding.
Check Food-Holding Performance
The important temperature is the temperature required for the food you hold.
The FDA Food Code generally specifies cold holding of time/temperature control for safety food at 41°F (5°C) or below, subject to exceptions. It is a model code offered for adoption; requirements applicable to your operation depend on the governing jurisdiction.
Keep these readings separate:
- The controller setting.
- Cabinet air temperature.
- Measured food temperature.
A broad adjustable range does not mean every setting is suitable for every food. Evaluate whether the proposed equipment can maintain the required food temperature under your loading, ambient conditions, and door-opening pattern.
Also distinguish holding chilled ingredients from cooling cooked food. Cooling has separate food-safety requirements; spare cabinet volume does not establish suitable cooling performance.
Identify the duty before choosing the equipment. If your process includes cooling hot batches, address that requirement explicitly.
Match Electrical Requirements and Certification to the Site
Match the exact model to the electrical supply at its intended position.
Use its nameplate and installation instructions to establish voltage, frequency, phase, plug configuration, current, and circuit requirements. Resolve any necessary electrical work before delivery.
Certification also needs a model-specific review.
| Documentation | What it addresses |
|---|---|
| Electrical safety certification | Applicable equipment safety standards |
| Sanitation certification | Applicable food-equipment sanitation standards |
| Energy-efficiency certification | Qualification under the relevant efficiency program |
Intertek’s ETL Sanitation program tests equipment against applicable ANSI/NSF sanitation standards. ENERGY STAR addresses energy efficiency. One mark does not establish every approval.
Where approval is required, provide the proposed model’s documentation to the relevant reviewer before purchase.
Compare Operating Costs and Service Support
Estimate electricity cost using daily consumption
Use published kWh/day figures for comparable equipment and test conditions where available. Rated wattage multiplied by 24 hours is not measured daily energy consumption.
A simple planning calculation is:
Annual electricity cost = kWh/day × operating days per year × electricity price per kWh
At an assumed electricity price of $0.25/kWh:
| Hypothetical daily consumption | Annual cost over 365 days |
|---|---|
| 3 kWh/day | $273.75 |
| 5 kWh/day | $456.25 |
| Difference | $182.50 |
These are illustrative inputs, not Magicool performance figures or a Los Angeles electricity-rate estimate. Use your actual tariff and account for operating conditions.
When comparing one large refrigerator with two smaller units, add the smaller units’ consumption together.
Evaluate maintenance and service arrangements
Ask who handles the initial service request, whether service is available at your address, and which expenses are covered during each warranty period.
Compressor coverage should not be assumed to include every associated repair cost.
Examine access to the condenser, door gaskets, shelves, and condensate components. Find out how replacement wear parts are obtained and which routine tasks your staff will perform.
Compare equipment price alongside delivery, unloading, applicable tax, electrical work, energy, and maintenance.
Magicool Reach-In Options to Compare
Use the following models as examples of a narrower two-door cabinet and a larger three-door cabinet. Choose between them after completing your inventory layout and site measurements.
| Specification | SL55R | SL83R |
|---|---|---|
| Doors | 2 | 3 |
| Listed capacity | 43.3 cu. ft. / 1,226 L | 66.5 cu. ft. / 1,882 L |
| Shelves | 6 | 9 |
| Width | 55.12 in / 1,400 mm | 82.68 in / 2,100 mm |
| Depth | 31.50 in / 800 mm | 31.50 in / 800 mm |
| Height | 80.71 in / 2,050 mm | 80.71 in / 2,050 mm |
Listed capacity and cabinet dimensions do not establish container fit or usable shelf space.
SL55R Two-Door Reach-In Refrigerator
Consider for: inventory that fits a two-door layout where preserving cabinet width matters.
Pros
- Uses 27.56 inches (700 mm) less cabinet width than the SL83R.
- Includes six shelves for allocating stock across storage levels.
Cons
- Provides less nominal storage than the SL83R, making the peak-inventory layout especially important.
- Has the same listed depth and height as the SL83R; the narrower width does not reduce those dimensions.
Choose the SL55R when: your inventory fits the usable shelf layout and the narrower cabinet helps preserve necessary kitchen space.
Before ordering: match your largest containers to the shelf dimensions and clear door openings.
SL83R Three-Door Reach-In Refrigerator
Consider for: a larger inventory held at a shared storage location with sufficient continuous installation space.
Pros
- Offers more nominal capacity than the SL55R at the same listed cabinet depth and height.
- Includes nine shelves for allocating a larger inventory across storage levels.
Cons
- Requires 82.68 inches (2,100 mm) of cabinet width before installation requirements are added.
- Keeps storage at one retrieval location, which may not suit widely separated workstations.
Choose the SL83R when: the additional shelf layout serves identified inventory and a central cabinet works with staff movement.
Before ordering: verify delivery turns, door swing, and usable aisle space around the wider cabinet.
Pre-Order Checklist for Los Angeles Delivery
Before committing to equipment for a location within Magicool’s Los Angeles delivery coverage, resolve these items:
- Inventory: peak stock fits the planned shelf layout.
- Containers: packages fit through the openings and can be retrieved comfortably.
- Installation: cabinet, ventilation, service access, and door swing fit.
- Delivery route: the equipment can reach its intended position.
- Electrical supply: the site matches the exact model’s requirements.
- Documentation: required specifications and certification records are available.
- Availability: current stock status and an achievable delivery schedule are confirmed.
- Unloading: dock, forklift, liftgate, and handling needs are agreed.
- Support: warranty coverage and the service-request process are understood.
Agree on where delivery ends and who moves the refrigerator into position. Arrange indoor placement, unpacking, or installation explicitly when needed.
Review shipping requirements · Review warranty coverage
Frequently Asked Questions
Are commercial reach-in refrigerators a standard size?
No single width, depth, or height applies to every model. Compare the exact cabinet dimensions, then add the required installation and door-opening space. Check packaged dimensions separately for delivery.
Will sheet pans fit any commercial reach-in refrigerator?
Do not assume universal compatibility. Compare the pans with usable shelf dimensions, door openings, supports, and airflow requirements. Some arrangements may require specific tray supports.
Do four half doors provide more capacity than two full doors?
Not necessarily. Door count describes access, while storage capacity depends on cabinet construction and internal layout. Additional doors also do not establish independently controlled compartments.
Is a reach-in cooler the same as a reach-in refrigerator?
In foodservice, the terms are often used for the same type of upright refrigerated cabinet. Check intended use and specifications because “cooler” can also describe display equipment and other refrigerated storage.
Does a commercial refrigerator use a lot of electricity?
Consumption varies by model, size, configuration, and operating conditions. Compare published daily energy use for suitable models, then calculate cost using your tariff. Capacity or door count alone does not establish the electricity bill.
With your inventory layout and site measurements complete, compare equipment against those requirements.
